Wood Pellets Guide - Home Heating Alternative

With the gaining popularity of wood pellets as a wood fuel, the manufacturers need to ensure that they are producing high quality wood pellets. The consumers must also at least know the essential properties of good wood pellets.Property # 1: Check the dimension. It should be small-sized wood pellet. Most wood pellets that are utilized as fuel have a diameter of about 6 – 8mm and a length of about 2cm. Furthermore, it should be uniform, regular and highly compacted. With this property, they can be easily stored and delivered. They will not take a lot of space. Also, they can be easily fed in an automated fuel handling system.

Property # 2: Know the moisture content. Remember that the lower the moisture content, the lower the need for energy to burn it off. The humidity of good quality wood pellets should be around 6-10%.

Property # 3: Ensure that they are mechanically durable. This means that high quality wood pellets can endure numerous handlings. They should withstand any kind of operation otherwise they would easily break and wear causing an increase on the number of fines in the pellets. Also, it is generally good when wood pellets can stand shipping even in long distance and time.

Property # 4: Check the amount of fines. The amount of fines would greatly influence the smoothness and easy flow of wood pellets in the boiler’s fuel feeder. The greater the amount of fines present in the wood pellets, the greater the likelihood of obstacle in the feeding system of boilers.

Moreover, minute particles burn faster compared to wood pellets. Thus, if numerous fine particles are found in the wood pellets, there is a big probability that they would generate unnecessary intense flame. The worst case scenario is it might lead to precipitation of ash that will demand cleaning the burner after cooling it off.

Currently, the manufacturers make it sure that the amount of fines should be at most 1%. It is checked time after time in the entire manufacturing process. Furthermore, to ensure that fewer fines are present in wood pellets, the producers measure it even at the last processing phase and screen it before distributing.

Property # 5: Know if additives are added. Preferably, the whole wood pellets should be natural. The chemicals or substances added would significantly influence the wood pellets’ emissions during combustion. Wood pellets are commonly produced from sawdust. Thus, a substance that must serves as a “binding agent” is necessary to hold them together and be compacted. Lignin, a natural component found in woods, serves this purpose. In any case those additives/chemicals are used, the quantity and type should be stated.

Property # 6: Check the density of wood pellets. Wood pellets should be highly densed. The degree of compactness would likely determine the possible amount of fines that can be found on the pellets. As mentioned, preferably zero to a very small percentage of fine particles must be present in wood pellets for these minute materials would affect the quality of flame produced. The looser the wood pellets are, the higher the amount of fines.